Vapor Blasting and Air Conditioner Repair

Vapor blasting is also recognized by the names wet blasting, dry blasting, slurry blasting, wet sand blasting and dry sand blasting. It is a technique for blasting materials including iron and steel, marble, granite, plaster, ceramic tile, sheet metal and fiberglass. This process is used to install roof shingles, roof decks, ceilings, floors, gutters, pipes, vents, exhaust fans, chimneys, doors and even copper roofing. The water vapor is blasted into the cracks and crevices to wear away the material. Often the application of this procedure will include the use of water-based adhesives or oils for better friction and abrasion performance.

When using vapor blasting to remove a contaminant, it is very important that you wear protective clothing including goggles, ear protection and a respirator. This is because the compressed air can cause some health problems. For instance, it can cause headaches and nausea if exposed to higher concentrations of contaminants. However, when done with gentler particles such as zinc coating, copper and cobalt, the exposure to these contaminants is mild and you don't have to worry about health problems.

You can achieve a fine result on aluminum surfaces using the vapor blasting method. To apply the aluminum oxide finish, you need to spray the abrasive media at the center of the aluminum plate and work outward. Work your way from the center to the outer edge using a rotary brush. For surfaces that require an aggressive solution, you can also use a combination of water and alcohol.

For sensitive engine parts that need a more thorough vapor blasting finish, you can opt to use a rate-based finish. This type of finish consists of high-pressure borate granules that are pressed into the exposed surfaces. You need to ensure that you are wearing protective gloves and goggles while working with this product. To apply the borate-based finish, spray a generous coating of metal primer onto the engine parts that you want to cover. Work your way from the outside inwards using a rotary brush. You can learn how to vapor blast on this page.

Another popular option when it comes to wet blasting is the use of a pressure pot or pressurized spray. You can choose from the variety of pressures available ranging from low pressure pot to high pressure pot. The advantage of using these techniques is that you get excellent results without adding any abrasives.

When working with a pressure pot is that you don't need to use any abrasives. The spray or vapor blasting gun shoots fine dust particles that are abrasive by nature. This helps in removing loose debris and dust that would otherwise clog your air filter. For rough metallic finishes, the use of a dust extractor can help in removing excess dust that can build up in your machine. With all these methods and applications you can be assured that your air conditioner will work effectively at all times. Get more enlightened about this topic at: https://en.wikipedia.org/wiki/Drilling_and_blasting.